Scanmaster Elm Key, free scanmaster elm key software downloads. Step 1: Install ScanMaster-ELM v2.1 software. Open Software CD or download software. Open ELM327 SCAN folder-ScanMaster-ELM327 v2.1 folder. Open ScanMaster-ELM327 v2.1 setup. Select setup language. Install ScanMaster-ELM setup Wizard. Accept license agreement. Select destination location. Select Start Menu folder.
- Regarding PC software this application is my favorite to use with ELM327 devices.
- Following the next video tutorial you will install without difficulty the complete application (with english subtitles soon).
- At the end of this article you will find a link to download the program. Remember that the password to unzip it is: obd2-elm327.es
- Once the ScanMaster program is installed, we will have to configure it properly. Logically for each version of ELM327 will be configured in a different way.
- To do this we will set the type of interface 'Serial (RS232 or Virtual COM Port Driver), leaving the port in autodetect mode.
- If you don't know which communication protocol is used by the ECU of the vehicle it's advisable to leave it in automatic mode. However, it's always better if it can be specified, this information can be obtained from the database of compatible vehicles..
- Once configured properly, it is only necessary to press the connect button and wait for the program to communicate correctly with the ELM327 device and this with the vehicle ECU. In the report of the screen will indicate to us all the steps that carries out.
- In the following video tutorial you will find all the information necessary to link the device by bluetooth with the computer and then the correct configuration of the program ScanMaster (with english subtitles soon).
- I'm working in it. Soon I will include the information needed for it.