12/3/2021

Bmw Fsc Code Generator 2014

86

CODING CHEAT SHEET for F and G series. F10, F11, F12, F01, F02, F06, F20, F22, F30, F31, F34, F54, F55, F56. TRY IT AT YOUR OWN RISK! WE TAKE NO RESPONSIBILITY! We recommend using ENET CABLE and Vgate iCar Pro Bluetooth module with BIMMER CODE app.

These update files improve Bluetooth communication with the car's multimedia system for new mobile devices. They are easy to install and the whole process can be done in a matter of minutes. The BMW policy on this specific problem is strange. The publicly available updates are very old, and if you have issues with your new phone, the only option to have a newer software version for the multimedia device is to visit a BMW Dealer. They can access newer software versions and charge money in the process.

The latest update from BMW for the CIC system came on 01.10.2014 - code name UPD01008.

The latest update from BMW for the NBT system came on 25.08.2016 - code name UPD05074.

All you need is a FAT32 formated USB drive with enough free storage space (which won't be a problem, since the update is as small as 8.07 MB), a car that has a USB audio interface (included in optional equipment codes 6FL, 6NH, 6NK or 6NL) as well as the Control Display and iDrive.

First of all you'll have to download the new software from the BMW support site (Make sure to enter the correct VIN - last 7 figures - in the specified window on the BMW site, in order to get the proper software update for your vehicle) and copy it onto the USB drive (again, remember that it must be formatted as FAT32).

Note: If you have a retrofited CIC, use this VIN#: E797432.

After that, all you need to do is insert the USB drive in the USB audio interface and access the Software Update option in the Settings menu of the Control Display. The iDrive system will be automatically updated.
Once the software has been updated, the system is restarted and data transferred from the USB device resynchronised where necessary. You'll just have to wait a few minutes until the USB device is operational again.
Generator

That's about it, and yes, it's as easy as that!

It seems that BMW has stopped this self-service and now you can get the newest Multimedia Software only by visiting the dealer.

There is no official explanation for this behaviour, but out of warranty, this software upgrade can be pretty expensive, so I suggest you doit only if you have big problems.Warning:

Some cars may have newer software than the one listed on BMW's support website. Compare your existing software version with the one in the update PDF files (above), if you get this error when upgrading:
'Software on USB device incompatible with this vehicle'
Disclaimer:
This is a DIY guide and, as such, you must be aware the procedures described here involve some risks. autoevolution cannot be held responsible for any possible damage that might result while following these instructions.

BMW FSC Code is required for BMW navigation map system update.In this article i will share the guide on how to generate BMW NBT & CIC FSC Code.

Tools you need for generate fsc code.

1.Laptop installed E-sys.(BMW E-sys Free Download)

2.BMW ENET Cable.(You can build one by yourself or buy it $16.99 )

3.FCS Code Generator Software.(Password: “Eintracht_Frankfurt”)

The first step you need to do is extracting the DE or 1B file:

Fire up E-sys make sure your connected to the F20 (notF20_Dir ect) via your VIN and then in the left hand vertical menu select FSC Extended.

For NBT (DE File):

In the Parameter section enter :

  1. Diagnostic Address(hex) = 0x63 2.
  2. Click on the Identifybutton and the Base variant HU_NBT will be populated
  3. Application ID for NBT= 0xDE
  4. Upgrade Index= 0x1
Bmw Fsc Code Generator 2014

For CIC (1B File):

In the Parameter section enter :

  1. Diagnostic Address(hex) = 0x63
  2. Click on the Identifybutton and the Base variantHU_CIC will be populated
  3. Application ID for NBT= 0x1B
  4. Upgrade Index= 0x1

In the Action section:

  1. SelectStore FSC and move from left to the right
  2. Click on the Read button
  3. Click Save and and name the file in the following format fsc where XXXXXXX is last seven letter s/numbers of your VIN or your donor NBT vin if you have retrofitted the NBT.
  4. [Optional] Youcan now disconnect E-sys from your car as the next stages can be performed offline.

Getting the Code Generation Software:

Unzip the directory attached. The directory can be placed/run from anywhere.

Generating the FSC code using the BMW_CIC_NBT_FSC_Generator for NBT:

If you are generating NBT, copy fsc.exe in the NBT_FSC directory to the tools directory

  1. Place your XXXXXXX.fsc into your toolsdirector y(same location as the Base64.exe)
  2. Open a command prompt(DOS Screen) and go to the toolsdirectory
  3. Type “Base64 XXXXXXX.FSC XXXXXXX_000DE001.FSC” and pressenter
  4. Open BMW001fFSC001fNBT 001fGenerator .exe
  5. Click “Br owse” and selectthe XXXXXXX_000DE001.FSC file yougener ated in step 3, it should be in your toolsdirectory.
  6. Choose your map productfrom the list(For me itwas”Road Map EUROPE NEXT 2015001f1)
  7. Click “Generate”

Generating the FSC code using the BMW_CIC_NBT_FSC_Generator for CIC:

If you are generating CIC, copy fsc.exe in the CIC_FSC directory to the tools directory

  1. Place your XXXXXXX.fsc into your tools directory (same location as the Base64.exe)
  2. Open a command prompt (DOS Screen) and go to the tools directory
  3. Type “Base64 XXXXXXX.FSC XXXXXXX_0001B001.FSC” and press enter
  4. Open BMW001fFSC001fNBT001fGenerator.exe
  5. Click “Browse” and select the XXXXXXX_0001B001.FSC file you generated in step 3, it should be in your tools directory.
  6. Choose your map product from the list (Road Map EUROPE PREMIUM 2014001f1)
  7. Click “Generate”

Bmw Fsc Code Generator Software Download

(Visited 2,485 times, 10 visits today)